News

What's so Cool about the Swivel-CAM Camera Mount? New Videos Show You!

The URBAN Swivel-CAM Motorcycle Camera Mount was designed to give you a multitude of angles to shoot from, and provide a classy look that is unmatched by other motorcycle camera mounts.

Available in several heights, with up to FIVE swivel/pivot points and built-in anti-vibration. Mount up or out - you can do just about anything with the Swivel-CAM! And it works with almost any camera.

Check out the 30-second videos below to see three great options!


Swivel-CAM Motorcycle Camera Mount on a Handlebar (or other Round Bar):



Swivel-CAM Motorcycle Camera Mount on the Brake or Clutch (Reservoir):



Swivel-CAM Motorcycle Camera Mount on the Mirror Stem:

GPS Mount Recommendations for Garmin, TomTom and Magellan

In our opinion, you don't need an expensive "motorcycle GPS." But you do need a quality mount that can deal with vibration, harsh road conditions and weather.

These days, there are many GPS makes/models to choose from. And yes, they are different enough that they require different mounts. Here are some of the most popular GPS brands with our recommendations:

Garmin GPS Mounts

• Garmin Nuvi series: Diamond Mount (our favorite) or Ball Mount
• Garmin Zumo: depends on the model; check out the Ultra-Swivel Gadget Mount and the eCaddy Ball

TomTom GPS Mounts

• TomTom "One" and “Start” series: Diamond Mounts
• TomTom "GO” series: Diamond Mounts
• TomTom Via series: Unfortunately the design of these units makes them difficult to mount on a motorcycle

Magellan GPS Mounts

• The Ball Mount may be used with RoadMate GPS units as long as you have a 17mm ball receiver hole (may be an aftermarket accessory).
• You can also check the Ultra-Swivel Gadget Mounts

Waterproof GPS Mounts

If you're looking to waterproof any model GPS, most models can be mounted with the Hydra.

Powering Your Device While Using the SLIDE Mount

The eCaddy Slide® Motorcycle Phone Mount was designed to accommodate all kinds of phones (and other devices) with and without cases/covers on them.

What if you need to power your phone while you ride, and your plug-in is inaccessible?

First, check to see if your phone screen re-orients when you turn it sideways (and even upside-down). If it does, you may have your answer already.

Second, it’s very simple to drill a hole in the SLIDE arm to accommodate your power plug. (Why didn't we manufacture it with a hole? Because there are thousands of phones and even more cases for them. Throw in the fact that you can mount your phone any direction you want in the SLIDE, and it's difficult to know where an individual person may want this hole.)

The only tools you need are chalk (or other way to mark where you need the hole) and a drill. Check out the video below showing how to do this. 



Looking for power options? Make it easy with a Battery Harness! See USB Mini and USB Micro options.

You really can't find another phone mount with this much flexibility AND classic good looks. It will be the last phone mount you'll ever need! See SLIDE Mounts here.

Five Tips for Choosing the Best GPS

Using GPS on your motorcycle is not much different than in your car. However, there are a few extra considerations when you’re out in the elements:

• Glare: It happens more often on a motorcycle (no ceiling over you), and it’s not as easy to adjust the GPS if your hands are busy steering the bike. So get the brightest screen you can (or a way to cut down on glare, such as an anti-glare shade).
• Do you need to operate the GPS with gloves on? In our experience, even GPS models that say they can be finger-operated don’t always work that way when it comes down to it. If you want this feature, do as much hands-on testing as you can.
• Do you want to be able to pre-program routes? Many GPS units allow you to do this, but it usually involves plugging into to your computer and doing some ‘techie’stuff. Get details to be sure you’re comfortable with the technology.
• Seeing vs. Hearing: Is seeing the GPS enough for you? Or do you need to hear the GPS as well? If so, take some time to research Bluetooth technology and how it can work for you.
• Rain: If you ride much, you’re bound to get a little rain on you somewhere. So is waterproofing your GPS important to you? (See Waterproof Mounts for ideas)

For more Tips & Tricks for GPS, see our Motorcycle GPS Mounts page.

 

 

 

 

New Windshield Mounts Put your Device Right in Front of You

The new URBAN Motorcycle Windshield Stem Mounts make it easier to see your phone, GPS or other device by positioning it right in front of you.

And now it can be done safety and attractively.

The URBAN Stem Mounts attach to any bolt, typically on the brace that runs across the windshield. Simply remove the stock bolt and replace it with the Stem Mount. Every kit includes an extra stainless-steel ¼-20 threaded screw should you need it.

The Stem Mount then connects to a device holder via our patent-pending Ultra-Swivel design. For example:

• SLIDE phone holder
• X-Grip Adaptor phone holder
• Form-fitted ‘cradle’ style holders for iPhone, Garmin and TomTom
• Camera rods of various heights
• Roadrunner PLUS drink holder
• Satellite radio & other gadget mounting plates

All parts are stainless steel and aluminum, so they won’t rust or wear. And the URBAN Motorcycle Windshield Stem Mount is so slim, you just might forget it’s there. The cost is comparable to other mounts, but we guarantee the quality is well above!

To see all the Windshield-mount options, click here.

 

 

 

 

 

Caddy Buddy Waterproof Mount: Fits Larger Phones & is Easier to Adjust!

Just in time for unpredictable (aka rainy) weather... The Caddy Buddy waterproof phone mount is back!

The Caddy Buddy has been re-engineered with today’s larger smart phones in mind (although you can use it for other devices as well). The cover flap has been extended to ensure rain can’t ever get in, and the viewable area has increased 30%! And, the back side ball design means angle can be adjusted easily (even ‘on the fly’)!

The Caddy Buddy waterproof phone/iPod mount is ideal if you’re looking for protection from rain/water but you want the whole thing to look slim and unobtrusive. The Buddy fits phones up to 3-3/8 inch wide and 6-1/8 inch high.The case features a clear front cover that allows touch and slide operations, and wires can be run out the edge if desired. Thanks to the mounted-ball design, the phone can be positioned vertically or horizontally (or anywhere in between!)

Like most Leader mounts, the Caddy Buddy parts are MADE IN THE USA. To read more about the Caddy Buddy, click here.